Under the Inventory section, a user can add or remove the Access Points, switches and Routers, manage and monitor multiple devices configured across different networks, move devices between networks, and assign tags.
Start by navigating to Configuration and then Inventory.
To add a device
Select vendor type
Device(s) : Enter the Mac Address of the AP. Press Enter or Tab on the keyboard to add multiple AP’s.
Network : Select the Network under which the APs are to be configured.
Click ‘Add Many Devices’, to add Access Points in bulk.
Upload File : Sample CSV file in the PCC can be used to add the devices in bulk. Click Browse, Upload the CSV file.
Click ‘Add Devices’ to complete the upload
To move a device between networks:
Begin by clicking the check mark on the left hand side of the inventory table.
Click Add to a Network ''
Select a network where you want to move a device
To remove a device from networks:
Begin by clicking the check mark on the left hand side of the inventory table.
Click Remove
Select a network where you want to remove a device
Add or Remove a Tag:
Begin by clicking the check mark on the left hand side of the inventory table.
Click Tag
Add or Remove a Tag in the dropdown
Apply an Uplink:
Begin by clicking the check mark on the left hand side of the inventory table.
Click Apply Uplink Template
Select an uplink template (i.e. AT&T profile, T Mobile profile)
How to filter and search the inventory:
Click the Filter button and select from up/down/all devices
Search a MAC, network, tag or other data fields