The Radio profiles are created to provide real-time RF management of the wireless network. To create a Radio Profiles, Navigate to Organization>Radio Profiles>+ Add Radio Profile.
Aps/Networks : Select the Mac Address of the AP or the whole network.
Note : If you create a Radio profile ‘1’ by adding the whole network, create another profile ‘2’ and select the AP Mac Address from the network added to profile ‘1’, the profile ‘2’ will be updated to the AP, as the priority would be given to the profile with AP Mac Address over the profile with network.
Name : Name of the Radio Profile
Country : Select the country for Channel and Power selection.
Radio Settings
2.4GHZ Radio Band
Disabled: Select ‘No’ to enable the radio profile
Country IE: Enable the country IE
Channel Bandwidth(MHz): Select 20MHz or 40 MHz Preferred channel bandwidth for better performance is 40MHz
Channel: Select ‘‘Auto’ for automatic channel selection or manually configure the channel from the drop-down menu
Power(dBm): Select ‘Auto’ or manually configure the power from the drop-down menu
Channel Utilization Measurement: Enable or Disable channel utilization measurement
5GHZ Radio Band
Disabled: Select ‘No’ to enable the radio profile
Country IE: Enable the country IE
Channel Bandwidth(MHz): Select 20MHz,40 MHz, or 80MHz. Preferred channel bandwidth for better performance is 80Mhz
Channel: Select ‘Auto’ for automatic channel selection or manually configure the channel from the drop-down menu
Power(dbm): Select ‘Auto’ or manually configure the power from the drop-down menu
Channel Utilization Measurement: Enable or Disable channel utilization measurement
Click ‘Create’
Additional Radio Band
Certain newer models of PIAP also support 6E and WIFI7. For additional radio band features please refer to additional Radio band support documentation.